The most effective mountain bike restore stands maintain the bike away from floor, permitting you to maintain your bike in tip-top situation and prevent cash within the course of.
The most effective mountain bike restore work stands make working in your mountain bike a way more snug and handy expertise. Whether or not it’s common upkeep, putting in an improve, or fixing a damaged half, a good work stand elevates your bike off the bottom to enhance entry and allow you to spin the wheels and function the drivetrain whereas engaged on the gears and brakes. And since most house work stands are light-weight and foldable, they don’t take up an excessive amount of room when not in use.
Having the data and the instruments to service and restore your personal bike will prevent money and time, make your rides extra gratifying, and reward you with an incredible sense of satisfaction. Scroll to the underside for an inventory of key parts to look out for when shopping for a restore stand, however to kick off, right here’s our choose of the most effective work stands in your mountain bike in keeping with our skilled reviewers.
You may additionally be interested by:
Weight: 6kg | Working top: 1,070-1,800mm | Folded measurement: 203 x 1,168mm | Max. load: 38.6kg | Ranking: 10/10
Execs: Ought to final years and years. Sturdy and steady. Rated for e-bikes
Cons: OTT for the occasional mechanic
Suggestions Sports activities has made a incredible work stand within the Final Professional Elite. It’s not low cost, however it should pay you again with years of trustworthy service. We all know – ours has been going sturdy for over 20 years.The photograph above reveals our authentic stand (circa 2001) and the model new model. Suffice to say Suggestions Sports activities hasn’t messed round an excessive amount of with its profitable components.
There’s a pleasant lengthy essential assist column that retains your bike away from the bottom for engaged on each wheels at a cushty top. It’s rock-solid because of the folding tripod legs and the revised clamp head makes getting your bike secured even simpler than the unique. Positive, the Final Professional Elite prices a bit extra initially, however it should nearly definitely show economical in the long term in the event you do loads of DIY upkeep.
Click on right here to learn our full assessment of the Suggestions Sports activities Final Professional Elite stand
As sturdy because the Suggestions Sports activities Professional Elite however round half the value
Weight: 6.04kg | Working top: 131cm | Clamp offset: 26cm | Leg footprint: 110cm | Ranking: 9/10
Execs: Nicely-built and sturdy. Good working top. Works with e-bikes
Cons: Could possibly be simpler to fold and unfold. Not very compact when folded.
Like its dearer stablemate, the Suggestions Sports activities Leisure Workstand has been in service with certainly one of MBR’s staffers for almost 20 years. As such it’s lived within the nook of a moist shed, being introduced into use on a semi-regular foundation for all method of DIY jobs, and remains to be going sturdy.
The working top is respectable and the clamp simply adjusts to grip onto a dropper put up. It’ll maintain each wheels away from the bottom and even deal with most e-bikes, remaining steady on a sloping backyard. The thru-pin could be tough to slip into place for folding and the rotating clamp is troublesome to torque up, however total it is a nice workstand that’ll in all probability final a lifetime.
Dialled workstand from the largest title in bike instruments
Weight: 7.5kg | Working top: 146cm | Clamp offset: 23cm | Leg footprint: 126cm | Ranking: 9/10
Execs: Heavy obligation. Good working top. Fast clamp. Secure even holding an e-bike
Cons: Legs could be sticky to fold up. Head gained’t grip a dropper put up higher tube. Heavy to lug round.
Park Instrument is a trusted title within the bike device enterprise and it sells a variety of various workstands which might be in style with execs and residential fanatics alike. It’s a chunky little bit of equipment, weighing over 7kg, so not the simplest to hold. However the folding legs are sturdy, even open air, and the clamp places your bike at a cushty working top.
The angled essential upright means there’s loads of pedal clearance when turning the cranks, and the small tray is beneficial for holding instruments handy. Our solely complaints are comparatively minor – the clamp doesn’t grip dropper put up higher tubes and the legs don’t fold/slide up simply, however these factors have been addressed on the brand new and improved PCS-10.3 model.
Click on right here to learn our full assessment of the Park Instrument PCS-10.2 Deluxe Dwelling Mechanic Restore Stand.
Excellent for automobile park faffing
Weight: 678g | Ranking: 9/10
Execs: Packs right down to a small measurement. Comes with shims and adapters for many cranksets. Peak adjustable.
Cons: Solely works for bikes with hole axles. Could be a contact unstable with heavy bikes.
Extremely moveable, the Granite Design Hex stand is designed to take the trouble out of these last-minute pre-ride jobs, wherever you’re. Constituted of sturdy however mild 6061 aluminium, it makes use of a folding tripod design to retain stability regardless of the small measurement and weight. You simply flick the short launch on the again of the primary strut and slide the 2 legs downwards. There’s a useful indicator to let you know the place to lock the legs in place to ensure they’re flat and in a steady place. Then elevate up the retainer arm till it slots into place. Clearly you want a motorbike with a hole BB axle, and the bottom must be comparatively flat, however the Hex Stand is a good gadget for preserving within the automobile.
Weight: 4.24kg | Working top: 151cm | Clamp offset: 28cm | Leg footprint: 100cm | Ranking: 7/10
Execs: Nice worth for cash (in the event you use often). Good working top
Cons: Not very steady. Low-cost building. Inside pedal can catch on device tray.
Decathlon is at all times an incredible supply of bargains, and this B’Twin 500 Bike Workstand is not any exception. Nothing else will allow you to get each wheels of your bike off the bottom, and able to work on, for much less money. The working top is absolutely good, too, so it’s a cushty stand to make use of.
The tripod base has fairly a small footprint, and the copious use of plastic within the building means it’s not probably the most steady design and may flex when your loosening tight parts. Additionally the clamp is simply too massive to work on the higher tube of a dropper put up with out some sort of shim. That mentioned, it’s nonetheless a little bit of a discount in the event you personal an analogue bike and solely do the odd mild upkeep at house.
What to search for in the most effective mountain bike workstands:
There are broadly two sorts of bike work stand: those who have clamps and those who use some type of cradle or arm. Don’t be tempted by something that isn’t a clamp work stand although. Positive, cradle/arm race work stands are cheaper and seem like a good suggestion. However they don’t maintain the bike steady sufficient to have the ability to work on it precisely.
How does a piece stand clamp the bike?
There are quite a few various kinds of clamp design, however the most effective ones maintain the seat put up securely (eliminating the prospect that you simply’ll injury any body tubes), are fast to regulate to completely different diameters, and sprung-loaded to allow them to be tightened and launched rapidly with one hand when you’re holding a heavy bike.
Search for smooth rubber-lined jaws and a few type of semi-quick-release operate with tighten/loosen lever on it. It must open/shut rapidly with one motion of a lever after which clamp down simply sufficient to carry issues just-so while you fine-tune the ultimate clamping drive. The extra squidgy rubber used, the higher. It not solely prevents beauty injury to your bike but it surely additionally holds issues extra securely. Attempt to keep away from actually deep/lengthy jaws, as they usually don’t match fashionable curvy, tight-space full-suspension mountain bike frames very properly. Modest jaws with loads of rubber on them are greatest.
You additionally want to ensure the clamp is rotatable so it might probably maintain your bike at completely different angles. That is actually helpful when gravity-bleeding disc brakes for instance.
Does a piece stand take up loads of house when not in use?
It’s an necessary query, as not like most bike retailers, most of us don’t have the posh of a everlasting workshop. Fortunately all of the work stands listed below are foldable to some extent, though solely the dearer variations are likely to telescope in top. We wouldn’t fear an excessive amount of about velocity of meeting/collapse; the important thing factor right here is putting a steadiness of compactness when stowed away versus stability when in use. Small work stands are likely to fall over. After which they go within the bin. Hand-in-hand with foldability is weight. Once more, you’ll want a good funds if you’d like a stand that’s mild, steady and sturdy.
Are three legs higher than two?
When it comes right down to the variety of legs, we’re massive followers of the basic two leg design, the place an angled central telescopic column varieties the third contact level with the bottom and leans ahead to position the bike’s centre of gravity in-between the 2 legs. Workstands with three or 4 legs could also be nice for accessing a full 360° across the bike however, in the actual world, you hardly ever want full entry and the footprint of the stand could be bigger, making it tougher to work on the bike in additional compact areas. Much better to have a protracted two-legged stand with a great clamp that may be rapidly and safely repositioned.
Equipment and spares
Among the best issues about going with a piece stand from one of many established premium manufacturers is the supply of equipment and spares. Not solely do these manufacturers’ work stands are likely to final quite a bit longer anyway, however it’s nice to have the power to purchase substitute jaw pads, QR brackets, rubber ft and equipment like magnetic dishes or half trays that mount on the central column.