[ad_1]
Common readers will know that previously few months I’ve made weld repairs to 2 petrol tanks, one among which nonetheless has a weep in a really inaccessible place.
These bolts got here out lots cleaner than they went in!
The sealer is available in two bottles, for 2 coats. It’s a must to pour it in, rotate it round, wait twenty minutes and repeat twice extra.
You let it drain from the faucet connection to keep away from it pooling within the backside of the tank.
The explanation you don’t need it pooling is that it gases off a little bit when setting, and you don’t need voids within the lining:
Three hours later, or when the sealer is dry however nonetheless cheesy, you do the second coat in the identical manner. Then you definately let it remedy for 5 days. Simple peasy.
This 400 ml package is meant to be enough for a ten gallon tank, and I am positive it’s. My plan was to seal each the MZ tank and the Huntmaster tank in a single sitting, however clearly two tanks have a higher metallic floor than one tank (although the 2 collectively totalled lower than 10 gallons) and I wasn’t assured I would have sufficient for each, so I ordered some extra sealer for the FH.
Now that son Tom has his MZ sparking, he is clamouring to get his tank again…
[ad_2]