[ad_1]
BMW R 1200/1250 RT sport-tourers, for all their stellar attributes, arrive from the manufacturing unit with a cramped cockpit, even for height-challenged riders like me. Wunderlich’s BMW Handlebar Risers for water-cooled 2014-current RTs enable the rider to boost the baseline handlebar positioning by 1.57 inches, providing superior ergonomics to riders preferring increased bars.
Associated: 2023 BMW R 1250 RT Assessment | Street Take a look at
The equipment arrives with all the pieces required for set up, together with the puller software required to take away the handlebar from its inventory place. First, collect your T8, T15, T30, T40, and T50 Torx bits, in addition to a small flathead screwdriver, a 13mm wrench or socket, and a torque wrench. A 17-step set up process is included with the equipment, however Wunderlich’s 20-minute video on the product web site is far more helpful for the DIYer.
Commercial
To start, take away the bar-end weights with the T45 Torx, after which take away the 4 T30 Torx holding the clutch and brake grasp cylinders on the handlebars. From there, a sequence of small Torx screws and tabs which maintain the change management housings in place are eliminated, the cable connectors are disconnected, and the housings are taken off the handlebar. The handlebar is now uncovered and prepared for elimination by way of T50 Torx and the included puller software, which requires the 13mm socket or wrench.
The Wunderlich BMW handlebar risers are then put in within the bar’s former place, and the handlebar is reinstalled onto the risers. To suit contained in the risers, the paint must be sanded off the 0.5-inch vanguard of the handlebar. I used a bench grinder with a wire wheel attachment, which labored completely in underneath 5 minutes. Lastly, the grasp cylinders and the change housings are reassembled again onto the handlebar in reverse order.
Out on the highway, it’s obvious that these German-made risers, that are machined out of stable aluminum and anodized to match the OEM end, are of top quality. The risers themselves rotate on the handlebar, permitting an added measure of advantageous tuning. The addition of those risers, particularly along side footpeg decreasing kits (similar to one from Suburban Equipment), enable the rider to essentially stretch out and sit contained in the cockpit somewhat than on the motorbike. Taller riders particularly can be far more snug with this setup versus inventory. MSRP for the Wunderlich #31040201 Handlebar Risers is $374.95.
See all of Rider‘s Components & Equipment critiques right here.
[ad_2]