(as of May 13,2021 04:17:21 UTC – Details)
Well constructed reservoir tank
10L large capacity, marked with accurate scale from 1L to 10L.4 bases keep the reservoir stable, making the middle of the bottom is the lowest part, to ensure that the internal liquid can be extracted completely2 large humanized design handles, convenient to transport the full water tank
Tightened sealing cap, very difficult to open, to ensure sufficient airtightnessHandle trigger is equipped with ring lock, hand-free while operating2-way control valves (blue screw valve and air inlet ball valve) should be consistent to achieve the conversion between extracting and dispensingSafety valve will trigger and automatically deflate when the pressure exceeds 43psi /3bar1/4″ American style air inlet plug is preinstalled in the pump assembly, and with a spare 1/4″ European style air inlet plug for more choicePressure gauge (0-80psi/0-6bar) for monitoring the pressure changeQuick coupler for connecting main hose
Hose with Flow Control Valve
80″ long transparent hose for long-distance transportationOne side quick plug for connecting pump assembly, and the other side quick coupler to connect dipstick tube or ATF adapterBall valve on the quick coupler to control the fluid flow, no need to keep pressing
Dipstick Tubes with Quick Plug
3PCS 1M dipstick tubes with 3 different outer diameter (6MM 8MM 10MM), meet the needs of different sizes of dipstick tubes in engine. Harder structure, easy to insert into the bottom of pipes
Metal ATF Adapters
15PCS metal adapters are specially used for refilling automatic transmission fluid, packed in a blow-molded case, with instructions for applicable models
Pneumatic Fluid Extractor and Dispenser Tool
YSTOOL fluid oil change system includes 10L container with pump assembly, 3PCS dipstick tubes and 15PCS ATF filler adapters, is an ideal two-way extractor and dispenser for most fluids. Pneumatic operation increases the extraction and dispense efficiency, convenient and safe.
Any fluid in the machines has its own unique function and service life. Regular maintenance and replacement are indispensable, which can ensure the normal operation of the parts and prolong their service life, and save more unnecessary costs.
1x Pneumatic fluid extractor and dispenser tool1x 80″ hose with flow control valve3x 1M dipstick tubes with quick plug (O.D. 6MM 8MM 10MM)1x Spare 1/4″ European air plug15x Metal ATF adapters in a blow-molded case with a applicable vehicle models instruction
1.Please refer to the instruction and operate under the guidance of professionals2.Wear protective glasses and gloves at all times3.Operate in a dry and ventilated place away from the fire sources 4.If the fluid is absorbed or drained slowly after repeated use, check the small blue cap on the nut and shorten the thread of the cap to restore the circulation speed5.If the operation is not smooth, please carefully check the sealing of each part but not try to open the black cover.
Change Motor Oil for Crankcase (OR Change Fluid for Transmission Case and Differential)
1.Park the vehicle on a flat ground, make sure that the vehicle transmission is in the “neutral” or “parking” position, and step on the parking brake.2.Start the engine. Let the engine idle until it reaches normal operating temperature. Once completed, shut down the engine.3.Remove the engine oil dipstick for changing motor oil (OR Remove the transmission fluid dipstick or fill plug for changing transmission fluid).4.Select a suitable diameter dipstick tube and insert it into the dipstick hole, move the tube in the dipstick tube up and down to ensure it was getting to the bottom.5.Connect the dipstick tube, the main hose, the pump assembly, the two-way air compressor, make sure all the parts are well connected without leakage, and close all the valves.6.Place the blue screw valve and the air inlet ball valve on “EXTRACT”, remember to keep the both valves consistent. Open the air compressor (choose vacuumize function), handle trigger, and ball valve on the main tube, lock the handle trigger to extract the oil or fluid from engine. 7.Once all the oil or fluid is extracted, close all valves, take out the dipstick tube from engine oil dipstick (OR transmission fluid dipstick or fill plug) and insert it into waste oil tank. Place the blue screw valve and the air inlet ball valve on “DISPENSE”, remember to keep the both valves. Open the air compressor (choose pressurize function), handle trigger, and ball valve on the main tube, lock the handle trigger to dispense the waste oil or fluid. Observe the pressure gauge and keep the pressure under control.8.Extract clean solvent or engine degreaser to rinse out the reservoir tank and dispense it out to waste liquid tank. Allow it to dry thoroughly.9.Then extract new motor oil (OR transmission fluid) and dispense it into engine crankcase (OR transmission) until the desired level.10.Follow your vehicle’s operating instructions to circulate the new oil and then re-check the level
1.Fluid temperature range : -3°F ~ 140°F2.While change the coolant, make sure the engine is cool, to prevent the hot coolant from spraying and scalding3.This kit can be used for any insertable pipe or tank to change non-corrosive and low-consistency liquids, such as engine oil, transmission fluid, differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water in vehicle, jet ski, lawn mower or other small engine. Do not use for corrosive liquids to avoid corrosion of parts. It is recommended to use our brake bleeder kit B08BFV4TZ4 or B08CR7KG9H to replace the brake fluid4.While use ATF adapters to change the transmission fluid, you need to lift the vehicle and drain the old transmission fluid from the drain plug on the transmission pan, then add the new transmission fluid from the fill plug or drain plug.
Application for 15PCS ATF Adapters
ATF101 (1/8″-27) Compatible with FordATF102 Compatible with universal BMW, Nissan, Honda, etcATF103 Compatible with Audi, VW, SkodaATF104 Compatible with Porsche, VW, AudiATF105 (M10 x 1) Compatible with VW, Mini Cooper, AudiATF106 (M24 x 1.5) Compatible with Audi, VW DSGATF107 (M22 x 1.5) Compatible with Audi, VW CVTATF108 (M18 x 1.5) Compatible with Skoda, VWATF109 (M12 x 1.5) Compatible with ALTIS 2010 BENZ 722.9ATF110 (M30 x 1.5) Compatible with Skoda, Audi, VWATF111 (Universal Flexible 300mm) Compatible with Honda, Kia, Hyundai, etcATF112 (M8 x 1) Compatible with Nissan, InfinitiATF113 (M18 x 1.5) Compatible with Toyota,LexusATF114 (5/16″-24UNF) Compatible with VOLVOATF115 Compatible with Universal (Flexible Hose)
YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine
This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual
YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving
Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4″ American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping
The main hose is 80″ long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valve on the quick coupler to control the fluid flow, very convenient. Please note, there is no instruction in the kit, please refer to your vehicle operation instruction and following product description to operate. Your satisfaction and recognition are always what we pursue, please contact us to resolve any issue