(as of May 15,2021 08:43:27 UTC – Details)
3″ FRONT + 3″ REAR SUSPENSION LIFT KIT
Enhance the look of your vehicle and run larger tires with Supreme Suspensions’ Full Lift Kit.
We are proud to offer you our High End Lift Kit made out of T6 Aircraft-Grade Aluminum and designed by our experts not only to lift your truck but to improve your ride quality and comfort as well as lifetime use.
Our Pro-Billet Series Spring Spacers are precision CNC machined from solid blocks of T6 Aircraft Billet Aluminum and finished with an Anodized Coating for maximum resistance against oxidation and corrosion.
Pro Comp ES Series Shocks are also included to improve your vehicle’s off-road handling and performance.
2005 – 2016 Ford F-250 Super Duty
2005 – 2016 Ford F-350 Super Duty
Will ONLY fit models equipped with Rear Overload Springs.
Front Lift: 3 Inches / Spacer’s Thickness: 3 Inches
Rear Lift: 3 Inches* / Block’s Specs: 9/16th Pins, 5″ Long, 3″ Wide
U-Bolt Specs: 17.5″ Long x 3.5″ Wide x 5/8″ Threads
PLEASE CHECK YOUR TRUCK’S SUSPENSION SETUP BEFORE ORDERING!
*Some vehicles come equipped with 2″ or 4″ rear pre-installed factory blocks. Rear Lift height will vary based on the size of existing block.
Please Note: An alignment is always recommended after altering the height of your vehicle.
(2x) T6 Billet Aluminum Front Spring Spacers(2x) T6 Billet Aluminum Rear Lift Blocks(4x) Round Bend U-Bolts(2x) Front Bump Stop Spacers(2x) Brake Line Relocation Brackets(4x) ProComp ES9000 Performance ShocksInstallation Hardware & InstructionsSupreme Suspensions Pro Pack
Increase ground clearanceInstall larger custom rims & tiresImprove the look of your vehicleMaintain factory ride quality
T6 BILLET ALUMINUM SPRING SPACERS
Our Pro-Billet Series Spring Spacers are precision CNC machined from solid blocks of T6 Aircraft Billet tempered to a yield strength of no less than 35,000 psi and finished with an Anodized Coating for maximum resistance against oxidation and corrosion. Renowned for its sheer strength and light weight, this premium lift material will never compress or warp under even the most excessive loads or extreme riding conditions.
T6 BILLET ALUMINUM REAR LIFT BLOCKS
These Rear Lift Blocks equipped with 9/16th Axle Locator Pins install simply and easily by placing the new blocks between your axle and OE leaf pack, and then securing everything together using our provided extended length U-bolts. Each block is Precision CNC Machined from T6 Billet Aluminum and finished with an Anodized Coating to protect them against corrosion and rust.
ZINC PHOSPHATE COATED U-BOLTS
This Kit comes with our newly designed set of zinc phosphate coated U-bolts, five times more corrosion resistant than those with typical zinc plating and stamped to satisfy the highest quality control standards. These U-bolts offer maximum safety by restoring the necessary clamping force on your spring assembly, eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle.
PRO COMP PERFORMANCE SHOCKS
Pro Comp ES Series Shocks are also included to improve your vehicle’s off-road handling and performance. With their twin tube construction and 10 stage velocity sensitive valving, these shock absorbers are the perfect complement to your lifted vehicle and will deliver a more stable, controlled, and comfortable ride. The extended length over factory lengths provides you with the ability to use your suspensions new fuller range of motion while eliminating binding and shock limiting.
COMPATIBLE WITH 2005 – 2016 Ford F-250 Super Duty (4WD) and 2005 – 2016 Ford F-350 Super Duty (4WD). For models with rear OVERLOAD Springs Only. Does NOT fit Dually models.
CONTENTS: (2x) T6 Billet Aluminum Front Spring Spacers, (2x) T6 Billet Aluminum Rear Lift Blocks, (4x) Round Bend U-Bolts, (2x) Front Bump Stop Spacers, (2x) Brake Line Relocation Brackets, (4x) Pro Comp ES9000 Series Shock Absorbers, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
TECHNICAL NOTES: 3 inch front and 3 inch rear suspension lift. For 4WD models only. *IMPORTANT: Some vehicles come equipped with 2″ or 4″ rear pre-installed factory blocks. Rear Lift height will vary based on size of existing block.
INSTALLATION: After an easy 3-6 hour installation process*, you’re ready to feature your new and improved ride! *An alignment is always recommended if you are altering the height of your vehicle.
BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Ensures correct bump stop clearance and prevents suspension from bottoming out. The included shocks will help maintain proper vehicle handling dynamics with the higher than factory center of gravity, while still maintaining a factory like ride quality.